(Serial numbers These are the installation instructions for replacing the firmware in a MSO3000 or DPO3000 series oscilloscope with the firmware in the DPO3000_v*file.Note that even though the file is named "DPO3000", it supports the MSO3000 series products as well.Recently I got my hands on a piece of oldish SUN equipment (Sun Fire V210/V240). Not perfect, but still usable and I will be able to fix the smaller issues. Type h for help, q to quit, Return or Enter to continue: Erasing the top half of the Flash PROM. diag-script = normal diag-trigger = error-reset power-on-reset diag-level = max verbosity = normal service-mode? = true error-reset-recovery = sync # firmware # /usr/platform/`uname -i`/sbin/scadm version SC Version v1.3 SC Bootmon Version: v1.3.0 SC Firmware Version: v1.3.0 # /usr/platform/`uname -i`/sbin/scadm download boot alombootfw ………………..One of the issues was the really really old OBP and ALOM installed. Programming OBP into the top half of the Flash PROM. (100%) Download completed successfully Please wait for verification …………
On the net I found a possibility to reset the NVRAM by pressing ESC when ALOM starts up, to display this menu: ALOM Menu e - Erase ALOM NVRAM.
Very recently, we demonstrated a major new function enabled in PLAYSTATION 3 firmware v2.40: XMB access in-game.
But that’s only part of the story, as the next system software update also introduces the Trophy system to the PS3.
(To find the relevant menus referred to below, push the Save/Recall button labeled "Menu" which is located in the area below the screen.) To save an internal saved setup to a file, first recall the setup.
Then go to the Save Setup menu and select "To File" and proceed to save to a USB flash drive.